Car tuning is the process of services the vehicle to make it better suited to the different set of performance requirements for which it was designed. High engine performance and dynamic handling features are the most notable things. The goal of car tuning is to increase the overall performance of the vehicle in response to the needs of the user. Tuning a vehicle is a good way to improve not only its performance but also enhance its appearance and capabilities. Tuning a car can be done in a variety of ways. In this article, we will discuss the complete car tuning guide in Pakistan.
When Car Tuning is Required?
Each vehicle should be tunned after running from 3000 kilometers to 5000 kilometers or every after one month to improve its overall performance. You should visit the car workshop for the maintenance of your car engine.
Car Tuning Guide in Pakistan:

Let’s talk about the complete car tuning guide in Pakistan in detail including those things which are needed to do in car tuning.
Things to do in Tuning:
Always refer to your vehicle’s manual for service intervals and specifications. If you have recently purchased a used vehicle and do not have the vehicle’s handbook or service history and are unclear about how to proceed. So, here are the following basic things of the car tuning which are necessary for the improvement of your vehicle’s performance.
1. Engine Oil Change:

Engine oil keeps the engine’s working parts clean, cool, and smooth. Oil changes are required on a regular basis for each engine. because it is in charge of keeping your engine’s many components running in sync with minimal functions The oil becomes contaminated over time and needs to be changed. You must change the engine oil of your car after running from 3000 km to 5000 km or after each month.
2. Air Filter Change:

The air filters of a car engine are is the main component of the engine. It keeps the car engine clean and healthy by preventing dust and impurities from entering the engine. Your air filters sink into the particles and reduce engine efficacy as you drive for kilometers. You must change the air filter of the engine.
3. Change Oil filter:

The oil filters of the engine block the pollution of the oil and help to keep it clean. Debris stuck in engine oil filters might reduce its efficiency and cause it to stop working correctly. So, you need to replace filthy oil filters from time to time in order to keep them clean.
4. Change AC filter:

Car air filters are the main component that helps provide a constant flow of cool air to the cabin of your car. The Ac air filters get contaminated with the passage of time. You must check and change the AC air filters of the car from the mechanic.
5. Check Break oil:

Car brakes are the most critical safety part is your car that ensures your safety of the car. The car brake oil is important for the car to work smoothly and correctly. You must be aware of the brake fluid level as well as the color of the brake fluid. You should inspect the car’s brake oil from the mechanic if the color changes to a darker shade. you must change the brake oil.
6. Check Gear oil:

the gear oil continuously strives to keep the gearbox performing best by reducing the stresses. However, like other lubricants, it may need to be replaced at some point, or the gradual accumulation of deposits could block the oil gearbox filter. You should also the Gearbox oil of the car from the mechanic in the tuning. If the color of the oil has darkened, you must change the gear oil.
7. Battery water level check:

In tuning, you must check the water level of your car battery. if the water level is down, you must refill it. In case of the car battery is a gel or dry battery, there is no need to check the water level.
8. Wheel alignment and Wheel balancing:

You must check the alignment of your car from the mechanic in the tuning process, if your car pulls to one side, your steering wheel rattles, or your steering wheel isn’t balanced. When the car is moving at a high speed on a daily basis, the alignment and balance of the wheel are disturbed. So, you must be done with wheel alignment and wheel balancing of your car.
10. Windshield Wiper Liquid Fill:

The windshield wiper liquid filling is one of the important parts of the tuning. At the time of tuning your car, you must check the windshield wiper liquid of the car. If the wiper liquid level is low in the container, you should refill your vehicle’s windshield wiper liquid.
11. Check Radiator Water Level:

The water level in the Car radiator is the big reason for the radiator coolant. The car can heat up due to the low level of coolant in the radiator. You must also inspect the car radiator coolant level during tuning. If the radiator coolant level is down, then the coolant should be added as needed. You can also fill the radiator with a 50-50 mixture of water and coolant.
12. Check Brake Pads:

Brake pads compress the rotor to bring your car to a stop. When the pads are overly deteriorated, however, exposed metal on the pads scrapes against the rotors every time you brake. It causes a grinding noise and perhaps harms the rotors. In that case, the car is unable to perform proper functions. You should inspect the brake pad of the car in tuning and replace it in the case of wear and tear.
What Are the Benefits of Tuning Your Car?
The purpose for tuning the vehicle is usually the same, whether your car is a classic or a current model. The engine and control settings are modified and adjusted primarily to make the car more durable, increase engine performance, boost fuel efficiency, and increase the car’s power.